[. . . ] 9 DDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CONNECTOR PIN ASSIGNMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STANDARD TIMING TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For more information and help in recycling, please visit the following websites: Worldwide: http://global. acer. com/about/sustainability. htm
EN- 4
X263W
UNPACKING
Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.
LCD Monitor
15-pin D-Sub Cable
DVI Cable (Only Dual-Input Model)
AC Power Cord
User Manual
Quick Start Guide
EN- 5
X263W
ATTACHING / REMOVING THE BASE
Install: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base.
SCREEN POSITION ADJUSTMENT
In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated by arrow below.
EN- 6
X263W
WALL MOUNTING (OPTIONAL)
To obtain a wall-mounting kit, contact your local dealer, Refer to the instructions that come with the base mounting kit. Screw holes (100 mm X 100 mm)
* For use only with UL Listed Wall Mount Bracket
EN- 7
X263W
CONNECTING THE POWER CORD
Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage areas. Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. For unit using at 220/240 V AC (outside of U. S. ): Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
SAFETY PRECAUTION
Avoid placing the monitor, or any other heavy object, on the power cord to avoid damage to the cable. Always put the monitor in a place where there is adequate ventilation. Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the face of the monitor. Refrain from giving shock or scratch to the screen, as screen is fragile.
CLEANING YOUR MONITOR
Please carefully follow the below guidelines when cleaning the monitor. Use a soft cloth to wipe the screen and cabinet front and sides.
EN- 8
X263W
POWER SAVING
The monitor will be driven into Power Saving" mode by the control signal from the display controller, as indicated by the amber-color power LED. State ON Power Saving Mode LED Light Blue Amber
The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. Frequency Pixel Frequency SYNC Polarity (kHz) (MHz) (H/V) (Hz) VESA VGA 640x480 31. 469 59. 940 25. 175 -/37. 861 72. 809 31. 500 -/37. 500 75. 000 31. 500 -/SVGA 800x600 35. 156 56. 250 36. 000 +/+ 37. 879 60. 317 40. 000 +/+ 48. 077 72. 188 50. 000 +/+ 46. 875 75. 000 49. 500 +/+ XGA 1024x768 48. 363 60. 004 65. 000 -/56. 476 70. 069 75. 000 -/60. 023 75. 029 78. 750 +/+ SXGA 1152x864 67. 500 75. 000 108. 000 +/+ SXGA 1280x1024 63. 981 60. 020 108. 000 +/+ 79. 976 75. 025 135. 000 +/+ WXGA+ 1440x900 55. 935 55. 887 106. 500 -/+ WXGA+ 1680x1050 65. 290 59. 954 146. 250 -/+ WUXGA 1920x1200 RB 74. 038 59. 950 154. 000 +/VGA TEXT 720x400 31. 469 70. 087 28. 322 -/+ Macintosh 640x480 35. 000 66. 667 30. 240 -/832x624 49. 725 74. 500 57. 283 -/1024x768 60. 150 74. 720 80. 000 -/Video NTSC 15. 730 29. 970 13. 500 -/NTSC 480P 31. 470 59. 940 27. 000 -/1080i 33. 720 29. 970 74. 176 +/+ 720P 44. 960 59. 940 74. 176 +/+ 1080P 67. 500 60. 000 148. 500 +/+
Display Mode
EN- 13
X263W
INSTALLATION
To install the monitor to your host system, please follow the steps as given below: Steps 1. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.
EN- 14
X263W
USER CONTROLS
Front Panel Controls
1. Power Switch: To turn ON or OFF the power. 3. Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2) When OSD menu is in off status, press this button to select scenario mode. 4. Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. [. . . ] 168 Xizang medium road, Huangpu District, Shanghai, China Contact Person: Mr. Easy Lai Tel: 886-2-8691-3089 Fax: 886-2-8691-3000 E-mail: easy_lai@acer. com. tw
Acer Computer (Shanghai) Limited
Hereby declare that:
Product: Trade Name: Model Number: SKU Number:
25. 5"W LCD Monitor Acer X263W X263Wxxx ("x" = 0~9, a ~ z, A ~ Z or Blank)
Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC as attested by conformity with the following harmonized standards:
-. EN61000-3-3:1995 + A1:2001
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:
-. EN60950-1:2001
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment
_______________________________
Easy Lai / Director Acer Computer (Shanghai) Limited
Date
Nov. [. . . ]